Tag: double slider
-

tuning trouble with the EFI on the T3 double slider
The grey double slider bus has been sat in the darkness in secure parking for a while while other projects and travel have taken a priority. now seemed the time to revisit – the last time i drove it was to move it from MAD-Workshop where we had done a weekend engine and gearbox swap…
-
New MOT on the T3 double slider
New MOT on the #vwt3 thrashed it up and down the motorway then washed and wax polished it to slow the rust – makes a glorious noise – still love this bus 🙂
-
T3 Double Slider air intake questions?
Back in here today #vwt3 needs a better air system solution – like make that #turbo I’ve been promising myself forever ? The short jenvey injection stacks just fit under the engine lid with aircleaners on but the shirt runner length was giving low air velocity and lumpy idle – making it difficult to get…
-
Roadtrip T3 double slider
Back in the other other #vwt3 – glorious noise and so much fun to drive
-

Your truckload of MOT fail has arrived..
My truck load of fail has arrived – MOT – zero handbrake function on LHS of the grey double slider T3… but with some wrangling and cleaning it works !
-
Fixed the T3 double slider with a spoon… #dublife
Out in the grey #vwt3 race van for the first time in a few months for a shakedown – it broke down – dead starter motor – possible sticky solenoid- unfortunately forgot to take tools so fixed it with a spoon from the #westfalia kitchen drawer… #dublife
-
This machine turns dinosaurs into hearing loss
Back in the T3 double slider with the race engine … love that noise
-

Winter roadtrip in the double slider
#vwt3 Motorway Service station alterations – this comes out – those go in #podfilter for the win.. Plus – Plug swap day !
-
it lives ! first run of VW t25 t3 wbx with new DTA elctronic fuel injection
first fire of 2.1mv vw t25 vanagon waterboxer motor with DTA efi.
-

More EFI wiring on the WBX engine
Mike and Lucian came over and we started doing more work on the 2.1l EFI MV wbx motor on the engine stand. More work on the loom and plumbing on the cooling system, oil system and getting ready for coil pack mounts… – to think I used to work on engines sat on the floor.…
